Bronze Race Star 92 Drag Star Racing Wheels – LIMITED Production

Bronze Race Star 92 Drag Star Racing Wheels – LIMITED Production

Limited Edition Bronze Race Star 92 Drag Star Production Wheels

Here’s your chance to have a set of Exclusive Race Star 92 Drag Star Wheels in Bronze Finish. This is a Limited Production Run only available in the 92 Drag Star Wheel sizes featured below:

Bronze Race Star 92 Drag Star Racing Wheels - LIMITED Production

Please Contact Us Below for Pricing!

Feel free to share:
AVS High Profile Bugflector II Hood Shield – Smoke: 2009-2018 Dodge RAM 1500

AVS High Profile Bugflector II Hood Shield – Smoke: 2009-2018 Dodge RAM 1500

AVS bug shields are built tough from durable acrylic to withstand an onslaught of abuse from airborne dangers and come with a dark smoke finish to complement your vehicle’s bold exterior. Also, the Bugflector’s low to medium-profile is sleek and aerodynamically efficient, so you don’t have to worry about reduced MPG. Cleaning is a cinch, since AVS Bug Deflectors are carwash-safe or easily removed from the hood.AVS High Profile Bugflector II Hood Shield - Smoke: 2009-2018 Dodge RAM 1500

AVS Bugflectors are easy to install, with no drilling or special hardware required for most vehicles. Simply use mechanical fasteners or double-sided 3M tape (depending on your vehicle), and enjoy bolstered front-end protection the next time you hit the road. Your new AVS Bug Deflector is backed by a Limited Lifetime Warranty.

Features: 

Application: 2009-2018 Dodge RAM 1500

Part Number: 25045, AVS 09-18 Dodge RAM 1500 (Excl. Rebel Models) High Profile Bugflector II Hood Shield – Smoke

Contact Us Below For Pricing!

Feel free to share:
Flowmaster Delta Force Cold Air Intake Kit: 2003-2006 Nissan 350Z

Flowmaster Delta Force Cold Air Intake Kit: 2003-2006 Nissan 350Z

Take the performance of your vehicle to the next level with the addition of Flowmaster’s new Delta Force® Performance Air Intake system for the 2003-2006 Nissan 350Z with 3.5L engine. The Delta Force system contains a modern looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone couplers and all stainless steel hardware.

Other features include a large diameter high-flow conical shaped 8 layer cotton gauze air filter, which traps more dirt than typical 6 layer designs, a custom-fit black powder-coated air dam with attachment brackets to securely mount the system in place along with soft bumpers to eliminate any metal to metal contact under the hood. The Delta Force Air Filters are serviceable with Flowmaster’s new Delta Force cleaning kits which will help them outlast your vehicle.

Features:

  • Serviceable Lifetime 8-Layer High-Flow Filter
  • No Cutting or Drilling For Easy Installation
  • No Tuning Required
  • Made in the USA

Application: 2003-2006 Nissan 350Z w/ 3.5L Engine

Part Number: 615161, Flowmaster Delta Force 03-06 Nissan 350Z Cold Air Intake Kit

 

Contact Us Below for Pricing!

Feel free to share:
Air Lift Performance Front and Rear Performance Series Kits: 2015-2018 BMW 2/3/4-Series (5-Bolt)

Air Lift Performance Front and Rear Performance Series Kits: 2015-2018 BMW 2/3/4-Series (5-Bolt)

If you’ve got a BMW, you know that you can expect the ultimate in sporting prowess, elegance, and comfort. With the BMW F30, the world’s best-selling premium car, it’s the perfect candidate for an Air Lift Performance makeover – putting your Bimmer on the ground and giving you those sporty dynamics that you’re looking for.

 Air Lift Performance Front and Rear Performance Series Kits: 2015-2018 BMW 2/3/4-Series (5-Bolt)

Now, there are lots of options for lowering your BMW, but nothing gives you the versatility of air suspension. Coil springs can get you low, sure, but they can’t give you adjustability at the touch of a button. With air springs, you don’t have to worry about any of those lowered car problems like bottoming out and scraping the undercarriage. Plus, they give you the absolute best in ride quality. After all, you’re literally riding on air!

In the front, Air Lift designed a kit that features their double-bellow air springs and threaded-body monotube dampers. Meaning, you can not only adjust the height of your BMW by changing the air pressure, but by spinning the lower mount up and down. The dampers are completely customizable to your needs, with adjustable rebound and compression, allowing you to tailor ride and performance characteristics. And if that wasn’t enough, it’s all topped off with camber plates for geometrical adjustment, all working together to drop you 3.6” from stock height!

The rear kit utilizes a compact, bolt-in, double-bellow air spring, giving you the simplest installation with superior spring rates and load holding capabilities. That set-up is matched with threaded-body, monotube dampers, also featuring adjustable rebound and compression, giving you the ability to drop up to 5.1” from stock height!

 Air Lift Performance Front and Rear Performance Series Kits: 2015-2018 BMW 2/3/4-Series (5-Bolt)

Application: 2015-2018 BMW 2/3/4-Series (5-Bolt)

Part Number: 

  • 78568, Air Lift Performance BMW F30 3-Series (incl xDrive) Front Kit
  • 78655, Air Lift Performance BMW F30 3-Series (incl xDrive) Rear Kit

 

Contact Us Below For Pricing!

Feel free to share:
Anzo Projector Plank Style Switchback Headlights: 2017+ Ford F-250/ F-350/ F-450

Anzo Projector Plank Style Switchback Headlights: 2017+ Ford F-250/ F-350/ F-450

These stylish lamp assemblies only work on F250s, F250s, and F450s that came from the factory with base halogen reflector headlights. With over 35 years of professional manufacturing experience, AnzoUSA surpasses the competition in quality, innovative styling, and product offerings.

Anzo Projector Plank Style Switchback Headlights: 2017+ Ford F-250/ F-350/ F-450All AnzoUSA headlights are 100 Percent street-legal and manufactured to the highest standards. These lights are plug and play with minimal wiring required for OE-style LED outline strip that functions as both a white running light and changes to amber when switched on.

Features: 

  • Aggressive updated look for your F-250, F-350, F-450
  • White to amber Switchback function
  • Does not fit models with Factory HID’s or LED’s
  • Does not fit Raptor

Application: 2017-2018 Ford F-250/ F-350/ F-450

Part Numbers: 

  • 111388 – ANZO LED Headlights 17-18 Ford F-250 Super Duty Plank-Style L.E.D. Headlight Black (Pair)
  • 111389 – ANZO LED Headlights 17-18 Ford F-250 Super Duty Plank-Style L.E.D. Headlight Chrome (Pair)

 

Contact Us Below For Pricing!

Feel free to share:
Firestone Air-Rite Air Command F3 Wireless Assembly Kit w/Light Duty Compressor

Firestone Air-Rite Air Command F3 Wireless Assembly Kit w/Light Duty Compressor

Firestone’s wireless air command systems include an air spring pressure control kit with a wireless remote, allowing you to control the air pressure levels from inside your vehicle cab or from up to 50 feet away. The remote control features three programmable preset buttons, displays air pressure levels, and allows for a visual inspection of the air bags to determine proper pressure levels, so there’s no guesswork involved. Wireless air command systems install without having to run wires or airline tubing inside of the vehicle. Depending on the model you order, Firestone systems are available with 2-corner or 4-corner readouts, and some units include a small compressor tank.

Features:Firestone Air-Rite Air Command F3 Wireless Assembly Kit w/Light Duty Compressor

  • Compressor system lets you monitor and adjust your air springs
  • Dual-path setup allows for front-to-back and side-to-side leveling
  • Wireless remote offers one-touch adjustment of air springs
  • Digital gauge on remote displays continuous, real-time air pressure readings
  • Light-duty, 12V compressor for occasional towing and light loads
  • The electronic control unit (ECU) can be mounted anywhere
  • Air line, wiring harness, and hardware included for installation
  • Designed for use with Firestone air springs
  • Made in the USA

Part Number: 2581 – Firestone Air-Rite Air Command F3 Wireless Assembly Kit w/Light Duty Compressor (WR17602581)

 

Contact Us Below For Pricing!

Feel free to share:
Bilstein B6 Twintube Shock Absorber: 2015-2017 Volkswagen Golf R / GTI

Bilstein B6 Twintube Shock Absorber: 2015-2017 Volkswagen Golf R / GTI

Bilstein B6 Performance (DampTronic) dampers are a performance upgrade to OE dampers designed to be paired with factory springs. All of the active features of the OE electronic suspension, along with the factory controls, will be retained with the installation of these dampers.

Each damper is rigorously tested for quality that meets or exceeds OE standards. The dampers also feature application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. B6 Performance (DampTronic) dampers will deliver improved safety and handling performance in a package compatible with factory electronic damping control.

 Bilstein B6 Twintube Shock Absorber: 2015-2017 Volkswagen Golf R / GTIFeatures

Application: 2015-2017 Volkswagen Golf R / GTI

Part Numbers:

  • 23-254343, Bilstein B6 15-17 VW GTI/Golf R (w/ Electronic Suspension) Front Twintube Suspension Strut Assembly
  • 20-254343, Bilstein B6 15-17 Volkswagen Golf R / GTI Rear Twintube Shock Absorber (DampTronic)

 

Contact Us Below For Pricing!

Feel free to share:
MBRP Cat-Back Dual Rear Exit Black Exhaust: 2017-2018 Ford Raptor EcoBoost 3.5L

MBRP Cat-Back Dual Rear Exit Black Exhaust: 2017-2018 Ford Raptor EcoBoost 3.5L

Introducing the 3.0″ cat-back system for the 2017+ Ford SVT F150 Raptor with the powerful EcoBoost 3.5L engine. This system was designed from the ground up with an entirely new approach to MBRP’s Performance Gas truck muffler to provide the best sound and performance available for your Ford Raptor.

Massive mandrel-bent 3.0″ tubing directly connects the factory Y-Pipe entering a dual in/dual out muffler and exiting through two factory-style tail pipes. Each system finishes with two massive 5.0″ tips coated in a durable black coating.

Gain up to 8 rwhp on an otherwise stock truck without the need for tuning or other modifications. Expect even better gains on trucks with additional tuning and intake modifications.

Features:

  • High-quality mandrel-bent 3″ stainless steel tubing
  • Crafted from 409 stainless steel (to midpipe) and 304 black-coated stainless steel (tailpipes and tips)
  • Direct-fit upgrade system reuses OE factory mounting points
  • Loud, aggressive, race-inspired sound
  • Includes two (2) 5″ black coated adjustable twin tips
  • Up to 9 HP @ 8 ft./lbs. power increase

Application: 2017+ Ford F-150 Raptor EcoBoost 3.5L

Part Number: S5263BLK – MBRP 2017+ Ford F-150 Raptor EcoBoost 3.5L 3in Cat-Back Dual Rear Exit Black Exhaust

 

 

Contact Us Below For Pricing!

Feel free to share:
SOTA S.C.A.R. Death Metal Wheels 20×9 & 20×10

SOTA S.C.A.R. Death Metal Wheels 20×9 & 20×10

SOTA S.C.A.R. Death Metal Wheels 20x9 & 20x10

SOTA Offroad is known for their sporty and aggressive wheel designs. One of the most popular options is the SOTA 566DM S.C.A.R. Death Metal wheel. It has a very luxurious design yet is surprisingly affordable.

It is constructed of a one-piece aluminum frame and perfected with its multi-spoke lug-specific style. This wheel is available in 20” size and a gloss black finish with milling. You can choose from 5, 6, or 8 lug bolt patterns to best fit your vehicle.

Features:

  • CNC carved from a lightweight but resilient aluminum alloy
  • Devilish, spiral spoke design catches the eye and puts challengers on notice
  • Compatible with your pickup, Jeep, or SUV’s specific tire pressure monitoring system
  • Available in a variety of tire sizes, bolt patterns, and stylish finishes for a custom, combative lookSOTA S.C.A.R. Death Metal Wheels 20x9 & 20x10
  • SOTA Offroad S.C.A.R. Rims are sold individually
  • Your SOTA Offroad S.C.A.R. Wheels carry a Lifetime Structural Warranty and 2-year finish warranty

Part Number:

  • 566DM-21098-19 – SOTA S.C.A.R. 8 20×10 8×180 -19mm Death Metal (Black Milled) 130mm
  • 566DM-20965+00 – SOTA S.C.A.R. 6 20×9 6×5.5 0mm Death Metal (Black Milled)
  • 566DM-20957+12 – SOTA S.C.A.R. 5 20×9 5×150 +12mm Death Metal (Black Milled)

 

Contact Us Below For Pricing!

Feel free to share:
Injen Evolution Cold Air Intake: 2015-2017 Dodge Challenger

Injen Evolution Cold Air Intake: 2015-2017 Dodge Challenger

Introducing the all-new Evolution sealed air intake system, part number EVO5102, for the Dodge Challenger and Charger Hellcat. This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel.

Injen Evolution Cold Air Intake: 2015-2017 Dodge ChallengerThe EVO5102 cold air intake system is next level. Injen’s one-piece sealed housing utilizes our all-new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place. From the housing, all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available!

Features:

  • Dyno Proven gains of up to 21 hp and 21 ft-lbs. of torque
  • Designed to work with the stock calibration
  • Aggressive intake growl under acceleration
  • Durable Roto-Molded Polyethylene tube and housing
  • Twist-Lock Technology* to securely integrate the air filter to the housing
  • Reinforced automotive grade silicone couplers
  • SuperNanoe-Web Dry air filter – no oiling, just back pulse with 25psi of air
  • Stainless steel band clamps with inner protective liner
  • Aggressive under hood appearance while maintaining an OE fit
  • Injen inspection badge allows you to check the condition of your air filter
  • Patent Pending

Application: 2015-2017 Dodge Challenger

Part Number: EVO51020 – Injen 15-17 Dodge Challenger Hellcat 6.2L / 16-17 Dodge Charger Hellcat 6.2L Evolution Intake

 

Contact Us Below for Pricing!

Feel free to share:
Eibach Sport-Plus Kit: 2008-2012 Dodge Challenger

Eibach Sport-Plus Kit: 2008-2012 Dodge Challenger

Eibach Sport-Plus Kit: 2008-2012 Dodge ChallengerEibach Sport-Plus performance handling packages have the same amazing performance as Eibach’s legendary Pro-Kit package, at a more aggressive level. They feature Sportline springs and an anti-roll kit that allows your vehicle to sit at a lower stance. This kit will also deliver the precise turn-in response, improved handling, and intense cornering grip that every enthusiast wants.

Features: 

  • SPORTLINE + ANTI-ROLL-KIT = PRO-PLUS
  • Performance Springs and Sway Bars = Superior Handling for the Serious Enthusiast
  • Stop Quicker, Corner Faster, and Better MPG!
  • Simple Bolt-On, No Modifications: Install, Set the Alignment, and Carve
  • Million-Mile Warranty

Application: 2008-2012 Dodge Challenger

Part Number: 4.9528.880 – Eibach Sport-Plus Kit for 08-12 Dodge Challenger

 

Contact Us Below For Pricing & Availability!

 

Feel free to share:
Wilwood Caliper-Forged Superlite 4R #120-13232-N

Wilwood Caliper-Forged Superlite 4R #120-13232-N

The Superlite 4R caliper series is the benchmark in asphalt short track, late model, modified, and open wheel competition. It also enjoys prominence in a variety of road-race, rally, and sport-driving applications. The new FSL4R model series is the latest innovation to this Superlite family of calipers.

Wilwood Caliper-Forged Superlite 4R #120-13232-NIt has been redesigned with internal fluid ports that eliminate the external fluid cross-over tubes. The transfer tube has been replaced with two additional bleed screw assemblies which allow symmetrical piston bore models to be mounted either right or left in a leading or trailing position. Differential bore models still require left hand and right hand orientation, but no leading or trailing configuration is necessary.

The most noteworthy feature of all the FSL4R caliper models is the exceptional strength and reduced weight of the forging. With assembled weights at just 4.4 pounds, the caliper body design in itself is a product of computer generated solid modeling and stress analysis technology.

Each caliper features closed-end bridges with a radial transition down to the main body and piston bore housings. The elimination of machined steps and sharp shoulders in this critical area provides a measurable increase in overall body strength and resistance to deflection under load. Every FSL4R body is stress-flow forged from a premium grade aluminum alloy billet.

 

Features of the Wilwood Caliper-Forged Superlite 4R #120-13232-N:

  • Replacement calipers for Wilwood brake kits
  • Stainless steel pistons for corrosion resistance
  • Optimum brake performance, balance, and heat dissipation
  • Improves your vehicle’s handling
  • Designed for perfect fit and function
  • Proudly manufactured in the United States
  • Part Number: wil120-13232-N, Wilwood Caliper-Forged Superlite 4R – Nickel 1.25/1.25in Pistons 1.25in Disc

Contact Us Below For Pricing!

Feel free to share: